• Skip to content
  • Skip to secondary menu
  • Skip to primary sidebar
  • Skip to footer
  • IEEE.org
  • IEEE Xplore
  • IEEE Standards
  • IEEE Spectrum
  • More Sites

IEEE Power Electronics Magazine

Unboxing the technology behind smart consumer electronics systems.

  • Home
  • Features
  • Columns/ Departments
  • Editor’s Blog
  • Industry News
    • Italian Startup Takes Proprietary AC/DC Architecture to Trial Production- 01 February 2022
    • Vicor Proposes Architecture to Eliminate 12V Battery from Electric Vehicles- 13 December 2021
    • Navitas Introduces 3G GaN Power ICs with Real-Time Autonomous Sensing and Protection- 19 November 2021
    • CAES Unveils Unprecedented GaN Based Single-Stage, Isolated DC-DC Converters- 11 November 2021
    • Digital Electricity Safely Transmits Power across Long Distances- 5 October 2021
    • More Suppliers Unveil High-Voltage Integrated GaN FET Solutions- 21 September 2021
  • Multimedia
  • About Us
    • Contact
  • PELS Resources
    • PELS Home Page
    • Membership
    • Standards
    • Publications
    • Career Center

Italian Startup Takes Proprietary AC/DC Architecture to Trial Production- 01 February 2022

December 1, 2021 by Ashok Bindra

01 February 2022
Last December, Italian startup Eggtronic unveiled an innovative, proprietary power architecture that significantly improves the efficiency of ac-dc converters while reducing its size. Labeled QuarEgg+, it is specifically developed to enable engineers to design ac-dc converters that can meet today’s performance, cost, size, weight and sustainability goals. Traditionally, such power converters utilize mature topologies like active clamp flyback (ACF) and quasi-resonant (QR).  According to the developer, ac-dc converters utilizing the new architecture are aimed at applications ranging from fast chargers and adapters for mobile devices and laptops to power supplies for loudspeakers and smart home assistants.

Targeting ac-dc converter designs below 75 W, QuarEgg+ (Figure 1) is the first in a series of power conversion architectures that make up the Eggtronic EcoVoltas family. The maker said that the EcoVoltas solutions boost the performance of FET switching devices, whether they are based on legacy silicon or wide bandgap materials such as gallium nitride (GaN) and silicon carbide (SiC). Plus, they also consume very low standby power while reducing the overall bill of materials.

FIG 1 QuarEgg+ is implemented using a proprietary secondary side controller.

According to the company, it has started its first trial production run for a U.S. west coast customer. Though the company will not divulge the name at this stage, it indicated that the U.S. customer is using a silicon-based QuarEgg+ converter with initial power level of 35 W. Concurrently, Eggtronic is also working on developing a 45 W version for the U.S. customer. Additionally, the company PR representative said, “Eggtronic is also actively involved in projects with a number of other customers in the U.S., Asia and Europe and plans to move to mass production before the end of the year.”

Recently, Eggtronic received €15 (US $16.73) million loan from the European Investment Bank, under its pandemic safety net, the European Guarantee Fund. Eggtronic plans to use the financing for research and development, as well as manufacturing infrastructure for its products.

To help speed the development of ac-dc applications built on QuarEgg+technology, Eggtronic is offering both GaN-based and silicon-based QuarEgg+ products with power outputs of 35 W, 45 W and 60 W. Output options include USB PD, fixed voltage and CC CV. Development boards, integrated power controllers, a range of proprietary magnetic components and comprehensive technical support is also offered.

Because QuarEgg+ operates with zero voltage switching (ZVS) under all load conditions, it’s efficiency curves are nearly flat from light-load to full-load. Consequently, the company website reports efficiencies of up to 95% at full load and up to 92% at light load (Figure 2). In addition, QuarEgg+ also lowers standby power consumption to less than 16 mW, reducing stress on the secondary side MOSFETs for lower cost and better performance. Thanks to very smooth transitions, the new architecture also reduces EMI to simplify filtering requirements.

FIG 2 The QuarEgg+ based ac-dc converter’s efficiency curve is flat over a wide load range. Source: Eggtronic.

QuarEgg+ is implemented using a proprietary secondary side controller (EPIC201ACQExx), which includes primary side driving, synchronous rectification and USB-C power delivery Revision 3.1.

Eggtronic is based in Modena, Italy with offices in San Francisco, CA, USA and Guangzhou, China. In a statement, Eggtronic’s CEO and founder Igor Spinella commented, “Thanks to EcoVoltas QuarEgg+ technology, designers of low-power ac-dc power conversion applications can now address the most stringent performance, size and cost criteria while contributing to sustainability goals by driving down power use and associated emissions.”

Filed Under: Industry News Tagged With: Industry News, Open Access

Primary Sidebar

Current Issue

Get the entire issue now.
03.22 Pels Cover

Current Issue Webinar

The magazine web seminar for the September 2021 cover article “The Virtuous Circle of 5G, IoT and Energy Harvesting” by Brian Zahnstecher and Mike Hayes is now available at https://resourcecenter.ieee-pels.org/education/webinars/PELSWEB111021V.html.

Associated Article
The Virtuous Circle of 5G, IoT and Energy Harvesting

About the Magazine

IEEE Power Electronics Magazine publishes peer-reviewed articles related to power electronics and its applications which encompass the effective use of electronic components, application of control theory and circuit design techniques, and the development of analytical tools used in efficient and effective energy conversion, control, utilization, and conditioning of electric power. The IEEE Power Electronics  Magazine is limited to the field of interest of the IEEE Power Electronics Society. Topics also include publication of new trend technologies that are being pursued by industry, design practices and case studies, significant amount of state of the art surveys tutorials, and non-technical contributions: news about society activities, interviews, and historical articles.

Reader Feedback

August 2021
Professor Lingling Fan, Professor at the University of South Florida and Editor-in-Chief of IEEE Electrification Magazine wrote to “White Hot” column author Robert V. White, “Dear Bob, I’d like to let you know that I enjoy reading your columns in PELS magazine. From  your recent writings, I got to know a lot, including what is the use of patents and the two branches of power electronics researchers.”

We like to hear you. Please send us your views/comments on our feature articles, columns, society news and other related content to bindra1@verizon.net and we will post it in the “Reader Feedback” section of the website with some edits. Feel free to suggest ways to further enhance the magazine content.

POPULAR ARTICLE

APEC Organizers, Vendors
Take Virtual Route to Reveal Latest Trends in Power Technologies and Products

A cancelled conference taps alternate methods to disseminate cutting-edge information

With the growing concerns of the worldwide coronavirus pandemic, the IEEE Power Electronics Society/Industrial Applications Society (PELS/IAS) and Power Supply Manufacturers Association-sponsored 2020 Applied Power Electronics Conference and Exposition (APEC 2020) in New Orleans, Louisiana, was cancelled for the safety of the attendees. While it was a difficult decision, the health, safety, and welfare of the community was paramount for the organizers and sponsors of the 15–19 March 2020 conference. Although this was the first such cancellation in APEC’s 35-year history, the organizers were quick to offer a virtual conference to those registered. In addition, peer-reviewed papers accepted by the conference committee were submitted to IEEE Xplore and are available to all.

Despite the challenges and adversities of COVID-19, the organizers worked diligently to virtually bring the conference and its presentations to the registered community via the APEC 2020 app and the eventScribe web portal. As a result, I was given a password (access key) to access the site and view a variety of the sessions. Before I go through the conference papers and sessions, I would like to take the opportunity to mention the vendors who promptly called IEEE Power Electronics Magazine and presented the latest trends in technologies and products online. The unbelievable situation created by the COVID-19 outbreak did not deter the vendors and emerging companies from taking their latest advances and developments to editors and reporters via phone and virtual meetings and booths. As a result, I was lucky to talk to a variety of power semiconductor companies, passive component suppliers, and power electronics experts, including marketing analysts, and gather the latest advances in power electronics technology.

Read More…

Search

Past Issues

Footer

MISSION STATEMENT:

To educate, inform, and entertain our community of
IEEE Power Electronics Society members
on technology, events, industry news, and
general topics relating to consumer electronics
and to further serve and support our Members in professional career development through tutorials and raising awareness of engineering tools and technologies.

The magazine is archived in IEEE Xplore, and articles from all issues are available for download.

LINKS

Contact IEEE | Privacy & Security |
Nondiscrimination  Policy | Terms & Conditions
Pels Logo